Six wireless transmission modes, do you know them all?

In order to set up the relay function of the wireless router, we understand the six wireless modes, and everyone will no longer be confused.

1. Access Point (AP)

In this mode, the wireless network card of the router acts like a "wireless HUB", responsible for establishing a data link between the wireless router and the computer (equivalent to an invisible network cable). Normally, the wireless connection of a home wireless router works in this mode by default.

2. Client

It works like a wireless network card on a laptop, only connecting to other wireless networks without emitting its own wireless network signal. For a wireless router, this mode is equivalent to enabling a wireless WAN port, and the following computers can only connect to this device via wired connection.

In this mode, the wireless router still provides DHCP and NAT functions. The four internal LAN ports form a separate IP address segment local area network, which is connected to the external main network through its own gateway on the wireless router.

[[235116]]

3. Client Bridge

Just like the "Client" mode, it is equivalent to enabling a wireless WAN port, and the following computers can only connect to this device via wired mode. However, the local area network formed by the internal LAN port and the connected wireless network segment are in the same IP address segment. The internal DHCP request will also be forwarded to the main wireless network.

4. Adhoc

Adhoc has a vivid metaphor, just like connecting two computers directly with a network cable, except that the network cable here is wireless. The most common devices that use adhoc connection are some handheld game consoles. This mode is rarely used on wireless routers.

5. Repeater

As the name implies, a repeater is one that receives signals while transmitting its own wireless signals. In this mode, the wireless router accesses the main AP as a wireless network card client, and then provides wireless access to the client through a newly added virtual interface (Virtual Interfaces). The greatest significance of this mode is that it can solve the problem that the wireless signal cannot be transmitted farther due to distance or obstacles. In this mode, the wireless router still provides DHCP and NAT functions, that is, all internal LAN ports and wireless client access constitute a separate LAN segment.

6. Repeater Bridge

Like the "Relay" mode, it can solve the problem that the wireless signal cannot be transmitted farther due to distance or obstacles. However, the computer terminal connected to the wireless router is in the same IP address segment as the main wireless network. Internal DHCP requests will also be forwarded to the main wireless network.

Summarize:

Normally, the wireless router works in "AP" mode. People who don't have special needs should not tinker with it.

If there are too many walls between the existing wireless router and the laptop (for example, if you want to share the Internet with your neighbors), you may encounter a situation where the signal near the window is good, but the signal near the computer is too weak. At this time, buying another dd-wrt router and setting it to "relay" can solve the problem of insufficient signal transmission distance. As for choosing "relay" or "relay bridge", it depends on your needs. For example, if the network being relayed is also your own home, then it is recommended to use "relay bridge". This will allow all computers to be in the same network segment, making it easier to visit each other. If you want to build an independent network segment yourself to improve security, then choose the "relay" mode.

There are few occasions where you need to use "client". One possibility is that your home computers all use network cables to access the Internet, but you need to share someone else's wireless connection. In this case, you can choose this mode.

Generally speaking, if the word "bridge" is used in network terminology, it mostly refers to two networks being connected at the data link level and both being in the same IP LAN.