Have you learned how to build the CC2530 development environment?

1. Introduction to IAR

ZigBee Wireless Network Node Development Platform Software Development Platform IAR Embedded Workbench (EW) C/C++ cross compiler and debugger is the most complete and easiest to use professional embedded application development tool in the world today. EW provides the same intuitive user interface for different microprocessors.

EW today supports more than 35 8-bit/16-bit 32-bit ARM microprocessor architectures.

EW includes: embedded C/C++ optimizing compiler, assembler, linker locator, librarian, editor, project manager and C-SPY debugger. Use IAR's compiler to optimize the most compact code, save hardware resources, minimize product costs and improve product competitiveness.

IAR System is the only company in the embedded field that can provide such solutions. EW supports more than 35 8-bit/16-bit/32-bit microprocessor architectures.

2. Install IAR810

Enter the directory of "All Materials for IoT Training Project\1. Environment Tools\IAR" and follow the steps in the following figure:

Double-click to start the EW8051-EV-8103-Web.exe program:

Click next;

Click next;

Select I accept......;

The installation will prompt you to enter the License, at this time we need to run the registration machine to crack it.

Double-click the IAR kegen PartA.exe program in the same directory of the CD to start it.

Click Generate to generate a new key. Copy the generated new License number and License key into the installer.

Some installation screenshots are as follows:

Copy the above License key to the following:

Then keep clicking next;

Select Install, then start the installation and wait for the installation to complete. The successful installation interface is shown below:

Click Finish to complete the installation.

3. Emulator driver installation

When the auxiliary software is not installed, the driver can be found in the IAR installation file. IAR comes with the CC2530 simulation download and debug driver, which can be installed as long as this file is found.

When you use the emulator for the first time, open the Device Manager and you will see that the emulator is not recognized. Right-click and select Update Driver Software:

Select Browse Computer..........;

Select the driver directory that comes with the IAR software. If the default path was selected during the previous installation, the driver directory is as follows:

 C : \Program Files ( x86 ) \IAR Systems\Embedded Workbench 6.0 Evaluation\8051\drivers\Texas Instruments\win_64bit_x64

Select OK to install. The installation is successful as follows:

4. USB to serial port driver installation

For program debugging and communication between the host computer and CC2530, USB to serial port must be used.

For 64-bit computers, open the following file to install:

 All information of the Internet of Things training project\Environmental tools\HL - 340 USB to serial port driver\CH341SER - 64 -bit system.EXE

32-bit option:

 HL - 340-32bit System.EXE ​

Plug the USB cable directly into the miniUSB port on the board, and you can see that it is recognized by Windows and generates COM3.

In this way, we can use the serial port tool to communicate with CC2530.